Addressing

Standard Requirements For Temporary Street Signs

Purpose: To aid responding emergency personnel in locating work sites more effectively and to standardize the appearance of temporary street signs at construction sites in Seminole County, the following standards shall apply:

It is the Contractor/Developer's responsibility to periodically inspect that signs are still in place and legible. Failure to maintain street signs could result in a Notice of Code Violation.
Temporary street signs shall be in place and inspected by the Addressing Office prior to approval of building permits.
All letters shall be at no less than 4 inches in height.
All letters shall be at least 1 inch in line width.
All letters shall be black in color and contrast with the immediate background.
Signs shall reflect the street name and designations approved by the Addressing Office.
There shall be no punctuation or unapproved designations included in the street signs.
Street signs shall be securely mounted with a minimum height of 6 feet.
Signs shall be positioned so that the blades are parallel to the corresponding street.
Cross blades are required at intersecting streets.
 
 

Prior to issuance of Certificate of Occupancy (CO), Permanent Street Signs shall be installed and inspected. For Permanent Street Sign requirements please contact the Seminole County Traffic Engineering Division at 407-665-5677. Permanent Street Signs have complete different specifications than temporary street signs.

Approved Designations:

Avenue AVE
Boulevard BLVD
Causeway CSWY
Circle CIR
Court CT
County Road CR
Cove CV
Drive DR
Highway HWY
Lane LN
Loop LOOP
Parkway PKWY
Pass PASS
Place PL
Point PT
Road RD
Run RUN
State Road SR
Street ST
Terrace TER
Trail TRL
Way WAY